11485 Dorsett Road, Suite E, Maryland Heights, Missouri 63043
How Much Does a Fence Cost in St. Louis?
Fence cost calculator · St. Louis & St. Charles County
What will your new fence cost?
Real prices from fences we’ve built here, not a national average. Put in your footage, pick a style and your gates, and see your number in about a minute.
5.0 on Google · 66 reviews
We pull the permits
No pressure sales
Fall offerBuilding a new deck with us too? Your fence is 10% off. Pick “Fence with a new deck” below. Sign by Nov 16.
Stained cedar privacy fence · St. Louis
What will my fence cost?
Enter your footage, pick a fence, add your gates, and get a budget price built from what we actually charge on real St. Louis jobs — not a national average.
4′ walk gates. Your first two are included in the price. Wood gates are framed in cedar on 4×6 posts so they do not sag; every gate gets a self-closing latch.
10′ double drive gates. Two 5′ leaves that swing open for a mower, a trailer, or a car. Add one if you need to get equipment into the back yard.
Privacy slats
Optional. Composite vinyl slats woven into the fabric for privacy and a cleaner look, priced by the foot. Gates stay open mesh.
Concrete pad under the cans
Recommended. A 4-inch broom-finish concrete pad poured by our own crew on a compacted base, so the cans sit level and the enclosure stays clean underneath.
Pad size, sq ft. Width times depth of the enclosure. A 6 x 8 foot pad is 48 sq ft.
Tear-out of an existing fence
Linear feet coming out. Includes pulling the old posts and the old concrete, hauling everything away, and reusing the holes where we can.
Your ground
St. Charles, St. Peters, O’Fallon, Wentzville, and most of North County dig easy. The further south and west you go toward the river bluffs, the more rock we hit — and every hole takes longer.
Your fence
Your posts
Line, corner and end posts go in 8-inch holes, gate posts in 12-inch holes, both 30 inches deep in concrete.
Your estimated price
—
Short run. Under about 140 feet the price per foot climbs, because the permit, drawings, utility locate, and getting a crew to your house cost the same whether we build 60 feet or 240. That is baked into the number above.
What this includes. Permit, drawings, utility locate, all materials, labor, concrete for every post, your first two 4′ walk gates, and cleanup. This is a budget price to plan around, not a quote — property lines, slope, access, and what is buried in your yard all move the number. The only way to get a real price is for us to walk it with you.
Tell us where to send it and your estimate lands in your inbox. We will follow up about a firm price whenever you are ready.
What the number covers
Complete new build including the permit, drawings, utility locate, all materials, labor, concrete for every post, your first two 4′ walk gates, and cleanup. Fence heights of 6′ and under on reasonably level ground.
Tear-out of an existing fence adds $10 per foot and includes pulling the old posts and concrete. Rocky ground (Eureka, Pacific, High Ridge, Wildwood, and the river bluffs) adds about $5 per foot because every hole takes longer. Slopes that need the fence stepped or racked, running the fence line through trees or roots, and hand-digging near utilities can all move the number — we will tell you before we start.
Short runs cost more per foot. The permit, drawings, utility locate, and getting a crew to your house cost the same whether we build 60 feet or 240, so under about 140 feet the price per foot climbs. That is built into the calculator.
OUR FENCES COME WITH A 1 TO 3 YEAR LIMITED WARRANTY ON LABOR AND MATERIALS — one year on pressure-treated wood, three years on vinyl and chain link. It is a common-sense warranty: if something comes back on our workmanship or a material fails, we cover it. If a car goes through it, we do not. Pressure-treated posts checking, splitting, and shrinking as they dry is normal for the material and not a defect — we will tell you that half a dozen times before you sign.
Before we can build: you need a property survey with metal stakes at the corners (we recommend Topos Surveying Corp., 314-838-5806, roughly $800–$1,400), and if you have an HOA, its written approval — the homeowner handles both. We handle the permit and the utility locate. Everything you need to know before a fence project is on our fence page.